Yes the 2nd VFO is on the correct band.
Jay Hainline KA9CFD Colchester, IL EN40om -----Original Message----- From: Bill Somerville Sent: Tuesday, December 30, 2014 14:49 To: [email protected] Subject: Re: [wsjt-devel] radio command issue using WSJT-x On 30/12/2014 14:11, Jay Hainline wrote: Hi Jay, > I am having an issue with my radio switching the 2nd VFO to Antenna 2 > position instead of keeping it on antenna 1 when using WSJT-X on the HF > bands. I don’t know if this is a rig control problem in WSJT-x or in the > DXlabs Commander program. Here is my set up: > > Radio: Yaesu FT-2000 > WSJT software: WSJT-X v1.5.0-devel r4831 > Logging software: DXlabs with Commander ver. 11.1.5 for rig control. Also > using JTAlertX 2.5.5 > > Radio has HF antenna connected to Antenna 1, 6 meter antenna on Antenna 2. > > When I am on HF, the radio shows both VFO's are on ANT 1. But if I fire up > WSJT-X and try and transmit, the 2nd (transmit) VFO switches to ANT 2. I > am > able to get it back on ANT 1 by turning off the 2nd VFO and hold the SPLIT > button in to reactivate it. Then it will transmit on ANT 1. Yaesu complicate things a bit by having band change commands as well as frequency set commands in their CAT protocol. The band change commands restore the last used aerial, AGC, pre-amp and, attenuator settings for the target band. The frequency change commands do not do that, they just leave the settings as is. DX Lab Suite Commander recently changed to do the right band change command before setting a frequency, this means that once you have the right aerial and other settings for a band they should always be restored when you return to that band. If you do not use Commander as an intermediary this will not happen, for now, but this is considered a defect that will eventually be rectified. I suspect that Commander is not quite right yet and is not using the correct band change command on the split Tx VFO. Does the problem you are seeing still occur if the split Tx VFO is already on the right band? > > I hope that explains it. If this message needs to go to another list, > please > let me know. > > 73 Jay > > Jay Hainline KA9CFD > Colchester, IL EN40om 73 Bill G4WJS. ------------------------------------------------------------------------------ Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Dive into the World of Parallel Programming! The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
