Joe/Bill/Developer's, Yesterday, I did a clean install of my OS, and then did a new build of 1.5.0- devel. When I start WSJTX for the very first time, I immediately go to the "Settings" tab to select, and input my user parameters. I then adjust the Wide Graph parameters, and almost always adjust the audio input slider last. As a result, my Wide Graph is always bright red, reflecting the over driven state coming from my audio input.
Yesterday, the new FFT Wisdom calculation/calibration was invoked automatically during my WSJTX user parameters setup routine. Does the over driven stated of my audio into the decoder, effect the quality of FFT Wisdom calculation/calibration? Does the decoder ignore the audio input stream, and just do mathematical calculations, and my misadjustment of the audio has no impact on the quality of the automatic calibration procedure? >From my layman perspective, it does not seem to. Yesterday, I got excellent decode's. All of varying signal strengths. I even got a -27 dB JT65 decode. Still, I am wondering if my FFT Wisdom calculation is the best if could, or should be. 73, John, N1ISA ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
