Thanks Bill, I'll give it a go.
Allan
VK4QG
-----Original Message-----
From: "Bill Somerville" <[email protected]>
Sent: 23/04/2015 11:41
To: "[email protected]" <[email protected]>
Subject: Re: [wsjt-devel] WSJT-X v1.5-rc1 (Release Candidate 1) PTT problem
On 23/04/2015 00:47, Allan Downie wrote:
Hi Allan & All
> Yes to both questions Bill. Win 7 and usual USB 4 port. I have just
> heard from a friend VK4ZB, he has the same issue. He is using Win 7 also.
OK, I have tracked down the main issue with this PTT problem. You can
work around it for now by changing the CAT serial port to something
other than the PTT serial port.
Change the "Rig" temporarily to something that enables the CAT serial
port field then change the CAT serial port field, blank is a good
choice, then change "Rig" back to "None". That should get the PTT signal
going again until I sort it out properly.
>
> Allan
73
Bill
G4WJS.
> ------------------------------------------------------------------------
> From: Bill Somerville <mailto:[email protected]>
> Sent: 23/04/2015 9:16
> To: [email protected]
> <mailto:[email protected]>
> Subject: Re: [wsjt-devel] WSJT-X v1.5-rc1 (Release Candidate 1) PTT
> problem
>
> On 23/04/2015 00:06, Allan Downie wrote:
> > Hi Gents,
> Hi Allan,
> >
> > I appear to have a problem with this latest version regarding the PTT. I
> > don't have any!
> >
> > I am not using CAT control. The transceiver uses a hard-wired PTT from
> > the RTS pins to a real com port i.e. no USB adapters
> > My PTT settings have worked on all previous versions (1.4, 1.5 and 1.6)
> >
> > I have un-installed the programme and reinstalled it resulting in no
> change.
> >
> > I notice Larry W7IUV on the WSJT users group has the same issue.
> Interesting! It is beginning to look like a change to resolve an issue
> on Linux systems make have caused a regerssion on Windows :(
>
> Can you confirm that you are using MS Windows and you have selected the
> correct serial port for PTT in the "Settings->Radio" page? I ask the
> last because there is a minor fault in v1.5.0-rc1 such that it doesn't
> report not being able to open the PTT serial port.
> >
> > Allan
> > VK4QG
> 73
> Bill
> G4WJS.
> >
> >
> >
> > On 23/04/2015 2:05 AM, Joe Taylor wrote:
> >> Dear development Colleagues,
> >>
> >> FYI, the message copied below has been sent to the "wsjtgroup"
> reflector.
> >> -- Joe, K1JT
> >>
> >>
> ############################################################################
> >> -------- Original Message --------
> >> Subject: [wsjtgroup] WSJT-X v1.5-rc1 (Release Candidate 1)
> >> Date: Wed, 22 Apr 2015 12:03:48 -0400
> >> From: Joe [email protected] [wsjtgroup]
> >> <[email protected]>
> >> Reply-To: Joe Taylor<[email protected]>
> >> To: WSJT Group<[email protected]>
> >>
> >> The WSJT Development Group is pleased to announce the availability of
> >> Release Candidate 1 for WSJT-X Version 1.5. Installation packages for
> >> Windows, Linux, and OS X can be downloaded from the WSJT web site:
> >> http://physics.princeton.edu/pulsar/K1JT/wsjtx.html
> >>
> >> Version 1.5 offers many advantages including faster and better decoding
> >> performance, more convenient handling of messages with compound
> >> callsigns, and further improvements in rig control. For details
> see the
> >> v1.5 Release Notice:
> >> http://physics.princeton.edu/pulsar/K1JT/Release_Notice_v1.5.txt
> >> and the full programmer's log of changes since v1.4:
> >> http://physics.princeton.edu/pulsar/K1JT/wsjtx-1.5.0.log
> >> Upgrading from any v1.4 installation will be seamless; there is no need
> >> to uninstall a previous version or move any files.
> >>
> >>
> >> For those interested in the very latest advances: Version 1.6 is
> >> progressing nicely. It will be the first WSJT-X version to support
> >> VHF-UHF-Microwave-oriented modes from WSJT, including JT4, JT65B, and
> >> JT65C.
> >>
> >> -- 73 from Joe, K1JT, for the WSJT Development Group
[The entire original message is not included.]
------------------------------------------------------------------------------
BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT
Develop your own process in accordance with the BPMN 2 standard
Learn Process modeling best practices with Bonita BPM through live exercises
http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_
source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
