On 09/06/2015 03:36, David Birnbaum wrote: Hi Dave, thanks for the info. Some further comments below. > On 08/06/2015 21:24, David Birnbaum wrote: > > Hi Dave, > > Built r5548 and tested with both WSPR and JT modes. works fine with > > JT65 and JT9. WSPR receives/decodes okay but wont transmit. > >>Were you using a single band or band hopping? What Pct Tx were you using > I used band hopping. Basically 40, 30, 20 at night and all bands 40-10 > during the day. Tx percent at 20%. OK, what is your rig and what interface arrangements do you have. Also can you summarize the settings you have on the "Settings->Radio" panel please? > >>I assume you remembered to click "Enable Tx"? > Yes > > > > I ran WSPR for 12 hours and after about 6 hours in it stopped > > reporting to WSPRNET. > >>I assume you still have decodes after it stopped spotting? > Yes spots continued, just not reported. Earlier in the run sport were > uploaded. Can't be audio settings because same program worked as JT65 -- > made some QSOs to be sure. I have checked the WSPRnet.org spotting code and I can see that spotting will stop if there is a delay or error uploading spots. I have changed it to resume spotting on the next period if possible.
Please report any recurrences of WSPRnet.org spotting ceasing. > > > > Operator error(s)? 73 Bill G4WJS. ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
