On 29/06/2015 23:51, f5djl wrote:
Bill and Michael
Bon Soir Jean-Louis,
Thanks a lot for your advice and here below is the result of
rigctl-wsjtx .
OK, looks like the recently added driver for the FT-991 is incomplete.
It is falling over when it tries to check if the CAT command it is about
to use is valid for the rig.
I will get the official version 1.5.0 installed tomorrow to confirm
if I get similar results.
I think you will get the same result.
We will sort out a patch for Hamlib3 to fix this.
Very best regards
Jean-Louis - F5DJL
73
Bill
G4WJS.
C:\WSJT\wsjtx\bin>rigctl-wsjtx -vvvv -m135 -scom5 f
rigctl, Hamlib 3.0~git
Report bugs to <[email protected]>
rig:rig_init called
yaesu: initrigs3_yaesu called
rig_register (121)
rig_register (127)
rig_register (110)
rig_register (105)
rig_register (106)
rig_register (107)
rig_register (109)
rig_register (120)
rig_register (101)
rig_register (122)
rig_register (123)
rig_register (111)
rig_register (115)
rig_register (113)
rig_register (114)
rig_register (128)
rig_register (131)
rig_register (116)
rig_register (103)
rig_register (124)
rig_register (104)
rig_register (125)
rig_register (129)
rig_register (132)
rig_register (130)
rig_register (117)
rig_register (119)
rig_register (118)
rig_register (126)
rig_register (133)
rig_register (134)
rig_register (135)
ft991_init called
newcat_init called
rig:rig_open called
newcat_open called
newcat_set_trn called
newcat_valid_command called
newcat_valid_command: 'FT-991' is unknown
rig_open: error = Feature not available
C:\WSJT\wsjtx\bin>
*De :*Bill Somerville [mailto:[email protected]]
*Envoyé :* lundi 29 juin 2015 23:51
*À :* [email protected]
*Objet :* Re: [wsjt-devel] WSJT-X and FT991 CAT issue
On 29/06/2015 22:21, f5djl wrote:
Hello to all
Bon Soir Jean-Louis
Not sure if this report is more relevant to Hamlib or the WSJT team,
I am testing a Yaesu FT-991 with WSJT-X release 5636 mainly in
WSPR-2 mode :
PC : Windows 8.1 Intel I7 8GB Memory
TRX : Yaesu FT 991 - USB connected
Drivers : CP_210X_windows as per Yaesu site
Hambib3 Build from G4WJS Public using JTSDK-Mysys (29/06/2015)
Issue : CAT not working
In setting radio Windows : Rig failure , Hamlib error : feature not
available while opening connection to rig .
I have tried via command line rigctl an seems to get same issue !
To test with rigctl you must use the rigctl-wsjtx.exe that the WSJT-X
produces if you want to compare with the same Hamlib 3 rig drivers.
Am I using the correct version of Hamlib3 to build WSJT-X ? is there
some further debug information I can provide you to assist with
identification of the issue? ( FYI exactly same code work like a charm
with an FT897 and an FTDI based interface)
The easiest way to eliminate build issues is to try with the official
v1.5.0 release, this has essentially the same Hamlib 3 code as the
error you are seeing is not mode specific.
Congratulations and thanks to all for the great job done in inclusion
of wspr mode in wsjt-x, the enhancements to the wspr decoder are just
terrific ! J
It is good! Congratulations to Steve and Joe.
Best regards
Jean Louis F5DJL
73
Bill
G4WJS.
------------------------------------------------------------------------------
Don't Limit Your Business. Reach for the Cloud.
GigeNET's Cloud Solutions provide you with the tools and support that
you need to offload your IT needs and focus on growing your business.
Configured For All Businesses. Start Your Cloud Today.
https://www.gigenetcloud.com/
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
