That definitely speed things up. If flies by the fix-up messages now. 73 Mike W9MDB
-----Original Message----- From: Bill Somerville [mailto:[email protected]] Sent: Tuesday, July 28, 2015 1:17 PM To: [email protected] Subject: Re: [wsjt-devel] WSJT-X: Qt 5.5 On 28/07/2015 19:06, Bill Somerville wrote: > On 28/07/2015 19:03, Greg Beam wrote: >> Hi Bill, > Hi Greg, >> Here's the crude times, just eyeballing the system clock. Bare in >> mind, this particular box is an old / slow 2.4 Ghz Quad Core clocked >> up to 3.0 Ghz. >> >> Start: 11:39 >> End Configure & Build: 11:41 >> ET: ~2m >> >> Start Fixup: 11:41 >> End Fixup: 11:49 >> ET: ~8m >> >> Start Verify: 11:49 >> End Verify: 11:54 >> ET: ~5m >> >> Total ET: 11:39 to 11:54 ( == SLOW!! ~15 Minutes ) >> >> The same box, on Linux, takes roughly 1.0 to 1.5 minutes or less. > Should be roughly the same on Windows but having the fixup use objdump > to determine dependent DLLs will slow it down at least that much. This is serious enough to warrant a quick hack, I have checked in a change that should speed things up a lot for those would don't have dumpbin.exe available and also for those using MinGW 4.9 which breaks dumpbin.exe anyway. It is not my final fix as I need to prepare something suitable for submission to the CMake developers but hopefully it will work for you and others for now. >> 73's >> Greg, KI7MT > 73 > Bill > G4WJS. ---------------------------------------------------------------------------- -- _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
