Hi Rick, To my knowledge, there has been little to no development effort on the WSPR-X branch for many months. While I can't / am not speaking for Joe, with the current efforts of porting WSPR and other modes into WSJT-X, there isn't likely to be much, if any, going forward.
There are a couple of options for testing / using the new WSPR decoders / modes in WSJT-X, which now has the RTW ( Real Time Waterfall ). If you want to build (compile) WSJT-X, you can use JTSDK win32. Install Instructions: https://sourceforge.net/projects/jtsdk/files/win32/2.0.0/ If you just want a pre-view / test the new port of WSPR ( which is much improved over WSPR and WSPR-X, including rig control ), you can use WSJT-Suite. Download and Install Instructions: https://sourceforge.net/projects/jtsdk/files/win32/2.0.0/wsjt-suite/ Other than that, you'll have to wait until v1.6.0 is Officially Released. There are a good number of folks on WSPRnet testing / using WSJT-X for WSPR now; most are reporting very positive results. 73's Greg, KI7MT On 08/11/2015 12:52 AM, Rick Hill wrote: > I am running WSPR-X v0.8 r3058 on a Windows 7 machine. Have noticed that > after a couple of hours operation it fails to generate tone for the > transmit cycle.... display goes red and indicates "Transmitting" but nil > TX...continues to decode just fine. > > > ------------------------------------------------------------------------------ > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
