Hi Håken,
On 9/21/2015 12:36 AM, Håken Hveem wrote:
> I found the error, the "power slider" must be at its top position,
> weird,- since the receive slider must be at almost the bottom of the screen.
Running with the Rx slider near the bottom of its range strongly
suggests that you have the RF gait set far too high. With its wideband
decoding capability, WSJT-X expects a linear receiver. Translation from
antenna input to audio output should amount to little more than a
frequency down-conversion from RF (upper sideband) to audio. It's best
to have AGC off, so that strong signals in the passband do not change
the receiver's gain as they fade or turn On/Off.
With WSJT-X's Rx audio slider at mid-scale, back down on your receiver's
RF gain control until the "thermometer" indicator indicates around 30 dB
with few signals (or only weak signals) present.
-- 73, Joe, K1JT
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
