Hi Charlie and all,
With revision 6010 of WSJT-X v1.6.1 I have added a checkbox labeled
"Track VFOs" at bottom right on the Astronomical Data window. By
default the box is checked and Doppler tracking behaves as before. If
you clear the box WSJT-X will stop sending Doppler-corrected frequencies
to your VFO(s). The program will continue to read and display the dial
setting, following any tuning adjustments made by the operator.
Please let me know if r6010 does what you want.
-- 73, Joe, K1JT
On 10/26/2015 5:22 PM, [email protected] wrote:
> Hi Joe
>
> Yes, I think that would work fine. On ticking the box I would take manual
> control of the radio tuning starting from where the program had tuned it.
>
> If it were possible, it would be useful if the program could still read
> the radio tuning, but not essential.
>
> Charlie
>
>> Hi Charlie,
>>
>> OK, so your WSJT-X configuration says you want rig control. Say you
>> have the "band edge" set at something like 10368.000 MHz, and the
>> "Frequency above band edge" set to 100 kHz. You enable "Doppler
>> tracking" and select "Full Doppler to DX Grid".
>>
>> It seems to me that what you now want is a checkbox that when ticked
>> prevents sending any further frequency control commands to the radio.
>> Does this sound OK?
>>
>> -- Joe
------------------------------------------------------------------------------
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
