On 29/11/2015 14:53, Greg Beam wrote: > There is another problem, but I've not figured out how to re-produce it > yet. The decode location seems to move up the waterfall about 1000hz or > so (sets to 2500hz) in certain circumstances (green line remains at > 1500hz). I have to change mode to JT65/JT9 then back to WSPR and it > resets it to 1500hz. > > The only thing I changed on the rig last night was working a bit of the > CQWW CW contest, which changed the filters around a bit, down to > 500hz/250hz, and the mode of course. > > When I restarted WSJT-X this morning, which was still set to WSPR mode, > I had to change modes to get WSSPR in the right spot on the waterfall again. Hi Greg,
what rig do you use? What do you have checked for the "WSJT-X" settings "Monitor off at startup" and "Monitor returns to last used frequency"? What do you have set in the "Mode" buttons in WSJT-X "Settings->Radio"? Do you recall if the rig was in CW or SSB mode when you saw the Rx offset on the waterfall? 73 Bill G4WJS. ------------------------------------------------------------------------------ _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
