Hi Russ, Thanks for the feedback. Glad things are working as expected.
73's Greg, KI7MT On 02/08/2016 03:10 PM, Russ Woodman wrote: > Greg, > > I read through the special information you provided below. I removed the > python3-pil and python3-pil.imagetk packages from my system and built them > using the procedure outlined in the docs. Apparently that was the trouble as > WSPR is now fully functional and my spots are showing up on the map. Thanks > for the help. > > 73, Russ - K5TUX > > ----- Original Message ----- > > From: "KI7MT" <ki...@yahoo.com> > To: wsjt-devel@lists.sourceforge.net > Sent: Monday, February 8, 2016 12:34:10 PM > Subject: Re: [wsjt-devel] WSPR SegFault on Decode > > Hi Russ, > > There is no pressing need to use JTSDK to build WSJT, WSPR or WSJT-X on > Linux. All of the apps can be built natively provided the build and > runtime dependencies have been met. WSJT-X has a special requirement of > passing a locally built version of Hamlib3, but that is easy enough to > deal with when following the build instructions included in the > repository checkout. > > As a side note, WSJT-X now provides WSPR, and it has an much improved > decoder. You may want to consider using WSJT-X >> WSPR rather than the > older Python3 version, but that's up to you. > > For WSJT and WSPR on Debian Jessie (v8.0), there is a package > incompatibility issue that is unfortunate, but it is what it is. > > The first thing is to ensure you have the build environment set-up > correctly. For this, you can use the instructions for JTSDK to install > and configure and install build dependencies (this will not install JTSDK): > > https://sourceforge.net/p/jtsdk/jtsdk/HEAD/tree/jtsdk-nix/trunk/README.pkg-lists > > > See Section: SPECIAL: Ubuntu 14.10 (Utopic) and Debian 8.x (Jessie) > > Obviously, if you are only concerned with the Python3 version of WSPR, > you would not need cmake, clang, or any the QT packages. > > After your certain you have set-up the Python3 packaging correctly, > re-build / re-run WSPR to test the status of things. > > > 73's > Greg, KI7MT > > > > > On 02/08/2016 11:09 AM, Russ Woodman wrote: >> Greg, >> >> I installed them as needed out of the Debian repos. I didn't use the JDK >> because I didn't know about it until after I did the build. It looks like it >> only provides hamlib3 support? Are there some versions I should compare >> between my system libraries and the JDK? >> >> 73, Russ - K5TUX >> >> ----- Original Message ----- >> >> From: "KI7MT" <ki...@yahoo.com> >> To: wsjt-devel@lists.sourceforge.net >> Sent: Monday, February 8, 2016 11:01:58 AM >> Subject: Re: [wsjt-devel] WSPR SegFault on Decode >> >> Hi Russ, >> >> I'm assuming you are comping from source here. How did you install the >> build and runtime package dependencies for WSPR? >> >> 73's >> Greg >> >> >> >> On 02/08/2016 08:55 AM, Russ Woodman wrote: >>> Hi, >>> >>> Just built WSPR 4.0r6470 from the SVN on my Linux machine running Debian >>> Jessie. I can start the application and configure it with no problems. Rig >>> control is working. During the receive cycle, WSPR operates correctly. When >>> it goes to decode the received data, it segfaults. Here is what I see in my >>> start-up terminal window: >>> >>> ------------------------------------------ >>> RUNNING WSPR >>> ------------------------------------------ >>> >>> Instance Name ..: WSPR >>> Script Name ....: /usr/local/bin/wspr >>> Run Directory ..: /home/russ/.local/share/WSPR >>> >>> *********************************************************************** >>> WSPR Version 4.0 r6470, by K1JT >>> Revision date ...: 2016-01-12 01:54:47 -0700 (Tue, 12 Jan 2016) >>> Run date ........: Mon Feb 8 15:41:27 2016 UTC >>> ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.rear >>> ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM >>> cards.pcm.center_life >>> ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM cards.pcm.side >>> ALSA lib pcm_route.c:947:(find_matching_chmap) Found no matching channel >>> map >>> ALSA lib pcm_route.c:947:(find_matching_chmap) Found no matching channel >>> map >>> /usr/local/bin/wspr: line 225: 2994 Segmentation fault env >>> PYTHONPATH=/usr/local/lib/wspr /usr/bin/python3 -O >>> /usr/local/share/wspr/wspr.py >>> >>> The ALSA messages are before the decode cycle. The last error line is where >>> the problem occurs. Any thoughts? >>> >>> 73, Russ - K5TUX >> >> ------------------------------------------------------------------------------ >> >> Site24x7 APM Insight: Get Deep Visibility into Application Performance >> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month >> Monitor end-to-end web transactions and take corrective actions now >> Troubleshoot faster and improve end-user experience. Signup Now! >> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> >> >> >> ------------------------------------------------------------------------------ >> >> Site24x7 APM Insight: Get Deep Visibility into Application Performance >> APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month >> Monitor end-to-end web transactions and take corrective actions now >> Troubleshoot faster and improve end-user experience. Signup Now! >> http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 >> >> >> >> _______________________________________________ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > > ------------------------------------------------------------------------------ > > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > > ------------------------------------------------------------------------------ > Site24x7 APM Insight: Get Deep Visibility into Application Performance > APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month > Monitor end-to-end web transactions and take corrective actions now > Troubleshoot faster and improve end-user experience. Signup Now! > http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ------------------------------------------------------------------------------ Site24x7 APM Insight: Get Deep Visibility into Application Performance APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month Monitor end-to-end web transactions and take corrective actions now Troubleshoot faster and improve end-user experience. Signup Now! http://pubads.g.doubleclick.net/gampad/clk?id=272487151&iu=/4140 _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
