On 29/05/2016 16:36, [email protected] wrote: > I did change the setting from HRD option to just IC7000. The WSJT-X > Started to decode right away. I had many stations worked. Yesterday > afternoon, the program give me a message: Hamlib collision while > trying to get the vfo.
HI Luis, that error message is not quite right. When WSJT-X pops up a message box you can capture the exact message text by hitting CTRL+C and pasting into an email or text editor. For the rig control error message box you can click "Show Details..." and then double click the details and then use CTRL+C to copy them to the clipboard. It sounds like the USB connection to the rig is being lost as you appear to be losing both the audio devices and the CAT virtual serial port. RFI is a likely cause, have you tried reducing RF power to minimum or using a dummy load for a Tx test. 73 Bill G4WJS. ------------------------------------------------------------------------------ What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic patterns at an interface-level. Reveals which users, apps, and protocols are consuming the most bandwidth. Provides multi-vendor support for NetFlow, J-Flow, sFlow and other flows. Make informed decisions using capacity planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
