After reading about the recent rework of MSK144 I built 7139 and tried
monitoring on 6M. I was presented with 50276 (OOB) which made sense, and
40M 7076 which did not, as selections in the pull-down box. No other
frequencies were offered. I understand I could populate them manually. So
I presume the lack of band options in the box is for developer convenience
at this point.
I was able to use the pull-down box to switch to 40M, but could not switch
back to 50276. Rather, it paused on 50276 then reverted back to 40M. When
I changed band at the rig it did track several band changes OK.
At some point I got a red-colored answer notification in the TX window.
This seems odd as I did not try or have any tx enabled. Was simply
monitoring to see what the fast graph might tell me. It only appeared
once, and might have popped up when I listened on 40M to see if anything at
all came through. SNIP attached.
So is this entry on the TX window a normal feature when running MSK144?
Was not reproducible. I did have VHF/UHF/Microwave features box checked
I checked the web for band allocations and saw meteor scatter suggested for
50.300 to 50.400MHz at
http://www.geekshed.co.uk/getting-started-in-meteor-scatter-ms/
Listened and tuned that range for a while with no further odd events.
Is there a suggested MSK144 watering hole on 6M?
K3 in digital mode on 6M Moxon at 25 feet AGL. Windows 7 Intel Dual core
at 3.0GHz.
--
73, chuck
ab1vl.com
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
