I use a Yaesu FT-991 and recently started evaluating the alpha build for
WSJT-X v1.7 this report is on r7289 but I think the previous alpha ones
have the same anomoly.
First; I can use WSJT-X 1.6.0 without any problems. With the v1.7 r7289;
Using JT65 and the 'Radio->Split Operation->Rig' setting, I transmitt
1000 hz higher on the lower portions of the waterfall. Example; I set
520 as TX/RX frequency and the TX goes out at 1520 while the TX/RX
indicators stay at 520. I set up a separate radio to verify this (a
FT-450D). If I use 'Fake It' or 'None' everything works. I do see the TX
VFO briefly switch down 1 kc but it immediately switches back up before
transmitting. The result is that I unknowinly transmitt on the wrong
frequency.
I don't know if it is something funny with the FT-991 or what. I did see
this as important enough to report though.
de K6WGX
Ken Miller
k...@cwfam.com
------------------------------------------------------------------------------
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today. http://sdm.link/xeonphi
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
