This is a further improvement on the QSO Time On/Off patch.
https://www.dropbox.com/s/ds88fzk3r0hz3s1/datetimeqso.patch?dl=1
TimeOn has been added to the UDP log message and Time renamed to TimeOff (which
is what it was representing before).Log window has both TimeOn and TimeOff now
so users can explicitly set the values if needed/desiredwsjtx.log changed to
ISO date standard and added TimeOffUpdated UDPExamples
Tx 2/3 is used to set TimeOn -- this overcomes the problem of sitting on Tx 1
and then waiting for an opening to start the QSO causing the log time to be too
early.TimeOn is backed up by the appropriate 1 or 2 transmit period cycles
respectively and should work in all modes and future modes.
MM1PTT is in this thread showing how he had many missed QSLs due to inaccurate
logging info. A good example of why we need some improvement in this
arena.https://au.groups.yahoo.com/neo/groups/HamApps/conversations/topics/12908;_ylc=X3oDMTM3NjJmc3RqBF9TAzk3NDkwNDMzBGdycElkAzc0OTAyMDE3BGdycHNwSWQDMTc0MDA2MzEwOARtc2dJZAMxMjkyMQRzZWMDZnRyBHNsawN2dHBjBHN0aW1lAzE0ODA2NjgzODcEdHBjSWQDMTI5MDg-
This patch should overcome these problems and allow accurate logging via
external applications like JTAlert and others without trying to guess the start
time via other means.This patch makes a pretty accurate start/stop time for
QSOs.
It covers the following situations:#1 Standard QSO#2 Double-clicking a CQ,
disabling transmit, wait for other QSO to finish, and Enable again..QSO
startime will relative to Enabled again#3 Double-clicking a CQ and just hanging
on waiting for an answer...QSO start time will be 2 transmit periods prior to
Tx 3 (or R+dB on tab 2)
Please give this some consideration....
de Mike W9MDB
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel