In JT9+JT65 mode the text window on the right-hand side displays
received messages at the selected Rx frequency. Your screen shot shows
your Rx (and Tx) frequency set at 553 Hz. The signal from NF3R is at
1165 Hz. Decodes of his signal therefore appear in your left ("Band
Activity" window but not in your right ("Rx frequency") window.
-- Joe, K1JT
On 12/6/2016 10:07 PM, John wrote:
>
> Attached is a screen shot showing a strange anomaly with this release.
>
> Setup was to write my tx and rx to the right-hand panel. As you can see,
> it didn't in this case. NF3R sent me a -01 instead of his gridsqare.
>
> The work-around was to make selections on the left panel.
>
> Prior to this happening, the app was performing as expected. The only
> change I made before this happened was to select retaining the tx power
> and tune power.
>
> AlarmeJT 0.6.0 was connected to the UDP server at the time this happened
> and appeared to function properly.
>
> Please let me know if I can help further.
>
> 73,
>
> John W4JKL
>
>
>
>
> ------------------------------------------------------------------------------
> Developer Access Program for Intel Xeon Phi Processors
> Access to Intel Xeon Phi processor-based developer platforms.
> With one year of Intel Parallel Studio XE.
> Training and support from Colfax.
> Order your platform today.http://sdm.link/xeonphi
>
>
>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
------------------------------------------------------------------------------
Developer Access Program for Intel Xeon Phi Processors
Access to Intel Xeon Phi processor-based developer platforms.
With one year of Intel Parallel Studio XE.
Training and support from Colfax.
Order your platform today.http://sdm.link/xeonphi
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
