Hello Bill. I did not uncheck "Auto Seq". Just the "Disable TX after sending
73" box in the Settings. I still have "Prompt me to log QSO" checkmarked but
the program does not stop TX after sending RRR now. It continues on to TX5
sending the 73 message. I have to click on the "Enable TX" button to make it
stop now as it stays red. Hope that make sense.
73 Jay KA9CFD
From: Bill Somerville [mailto:[email protected]]
Sent: January 2, 2017 13:54
To: [email protected]
Subject: Re: [wsjt-devel] Prompt to log QSO when either RRR or 73 is sent
On 02/01/2017 13:40, Jay Hainline wrote:
I figured out my issue with the auto sequencing stopping at RRR. It does not
have anything to do with with prompt to log pop up. I had Disable TX after
sending 73 checkmarked in Settings/General tab. For some reason, it is
disabling TX after sending RRR instead.
Hi Jay,
the disabling of auto Tx and the automatic pop up of the logging dialog are
currenty linked. I believe the thinking was that if you are able to log then
you should stop sending. IMHO this is only true for the caller as the
station running the frequency is obliged to keep sending RRR until they are
sure that the caller has seen it, even though their end of the QSO is
compete and they can log it. This made sense when the logging reminder only
came up for 73 messages, now it also does for RRR messages and that is
causing the problem here.
Maybe we should pop up the log QSO dialog but only disable auto Tx once the
Ok has been clicked. Another option might be to split the setting into two
options like "Prompt to Log QSO" and "Disable auto Tx *after* logging", the
latter maybe only applying if the message that prompted logging was a 73
message.
There must be a way of doing this that satisfies all modes and operating
methods.
73 & HNY
Bill
G4WJS.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
