Hi Joe, This is great news. I tried to convert the FMT Fortran files to C++, but failed in an epic way, errrr. This will be a very welcome addition to WSJT-X.
Thanks! Greg. On 1/9/2017 2:45 PM, Joe Taylor wrote: > Hi all, > > A brief follow-up to my message about FreqCal mode in WSJT-X. The > attached screen shot shows what my screen looked like after the program > has cycled through the 11 test frequencies in my list. > > Counting up from the bottom in the waterfall, the frequencies are 660, > 880, 1210, 2500, 3300, 5000, 7850, 10000, 14670, 15000, and 20000 kHz. > The signals at 2500, 3330, and 7850 were too weak to use atthe time of > this test. The sequence starts over again after the 20 MHz signal from > WWV. > > -- Joe, K1JT > > > ------------------------------------------------------------------------------ > Developer Access Program for Intel Xeon Phi Processors > Access to Intel Xeon Phi processor-based developer platforms. > With one year of Intel Parallel Studio XE. > Training and support from Colfax. > Order your platform today. http://sdm.link/xeonphi > > > > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ------------------------------------------------------------------------------ Developer Access Program for Intel Xeon Phi Processors Access to Intel Xeon Phi processor-based developer platforms. With one year of Intel Parallel Studio XE. Training and support from Colfax. Order your platform today. http://sdm.link/xeonphi _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
