Don't know why but perhaps the other two lines on txrb6 should removed then
since they are ineffective.
Joe, can you elucidate the reason for Tx1 instead of Tx6? Looks like it might
have something to do with VHF ops?
de Mike W9MDB
From: Bill Somerville <g4...@classdesign.com>
To: wsjt-devel@lists.sourceforge.net
Sent: Saturday, March 4, 2017 3:17 PM
Subject: Re: [wsjt-devel] Tx6 on startup
On 04/03/2017 21:07, Black Michael wrote:
Took a look at the startup and it appears it was the intent to have Tx6 on
startup.
Deleting one line makes it happen. txrb6 was already set but later txrb1 was
set.
Hi Mike, Joe made that change in r5282, commit comment was: Better logic
for handlind the band comboBox.
Tx1 message selected on startup.
Allow late Tx start (at least during testing phase).
Apply Doppler only above 50 MHz.
Tx audio freq fixed at 1000 Hz, in JT4 mode.
73
Bill
G4WJS.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, SlashDot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
