Hi All,
The slider next to the level meter only seems to affects the wide graph's
waterfall when "flatten" is off. To avoid others this confusion would it be
better to scrap that slider and just use the sliders on the wide graph?
Regards ... Tony VK2AJF
On 7 March 2017 at 11:21, Black Michael <mdblac...@yahoo.com> wrote:
> The slider adjusts the waterfalls now like it always did. The effect on
> the meter was confusing too many people when setting audio so that was
> disconnected.
> On the fast graph the slider controls both the spectrum and
> waterfall...and just the waterfall on the wide graph.
>
> de Mike W9MDB
>
>
> ------------------------------
> *From:* Edson W. R. Pereira <ewpere...@gmail.com>
> *To:* WSJT software development <wsjt-devel@lists.sourceforge.net>
> *Sent:* Monday, March 6, 2017 6:14 PM
> *Subject:* Re: [wsjt-devel] Cumulative patch
>
>
> Hi Joe,
>
> It looks very good here. But this is only a subjective opinion from
> someone with ageing eyes. Suggestions from other developers should also be
> considered.
>
> I like the way the level meter behaves now. Disconnecting my antenna, the
> level drops down to about 7-8 dB. With the antenna connected, it raises to
> about 20 dB when only weak signals are present. In general, the level stays
> around 30 dB. I have no audio level adjustment in the RX chain.
>
> Is the input level slider still needed?
>
> 73, Edson PY2SDR
>
>
>
>
> On Mon, Mar 6, 2017 at 7:24 PM, Joe Taylor <j...@princeton.edu> wrote:
>
> Hi Edson,
>
> Revision 7599 uses QColor(85,170,85) for "normal" and QColor(232,81,0)
> (a dark orange) aof "too low".
>
> I think the dark orange is an improvement. Not so sure about the
> gray-green, but perhaps others will like it ??
>
> -- Joe
>
> On 3/6/2017 4:06 PM, Edson W. R. Pereira wrote:
> > Hi Joe,
> >
> > I've compiled the SVN head and am using it. The level meter color looks
> > good, but it may be a little better if the green could be a little
> > darker to have better contrast with the widget grey background. Can you
> > try a QColor(85,170,85) and see if it looks ok for you?
> >
> > I agree with Keith's comment. Yellow on a light grey background is quite
> > difficult to see. For levels below the threshold, red or perhaps orange
> > could be used.
> >
> > Mike's suggestion is quite interesting. It could be informative to show
> > the noise level. This could be a horizontal grey line over the signal
> bar.
> >
> > 73, Edson PY2SDR
> >
> >
> > On Mon, Mar 6, 2017 at 4:45 PM, Keith Laaks <wkla...@gmail.com
> > <mailto:wkla...@gmail.com>> wrote:
> >
> > HI Joe,
> >
> > On my MacBook with direct USB interface to an FT-991, by adjusting
> > Menu 73 ‘DATA OUT LEVEL’ right down to 0, I can get the bar to show
> > the yellow with the meter at around 5dB level. Against the grey
> > background the yellow does somewhat appear white and I suspect some
> > users may miss the fact that the color is trying to draw their
> > attention to the too-low audio level. Maybe should be red also?
> >
> > (By the way, at the zero setting I also get solid ‘birdie' spectrum
> > lines at 1K, 2K, 3K and 4K on the graph, with traces of some louder
> > stations just showing between these).
> >
> > When I adjust the Menu 73 up to 1, the audio jumps to around 20db
> > and he bar color to normal green (birdies disappear).
> >
> > Radio Data Out Level -> Meter Audio
> > 25. -> 45db
> > 50 (default) -> 55dB
> > 75 -> 60dB
> > 100 -> 67db
> >
> > On my setup I am not able to ‘overdrive’ audio input.
> >
> > By the way, I am using Qt5.8 and I just noticed that the band
> > selection dropdown is now working 100% again.
> > When I switched to 5.8 originally last month (to sort my audio
> > issue), I noticed the dropdown did not drop - but I could still just
> > enter the band manually.
> >
> > Lots of activity on 7.076 this evening….
> >
> >
> > 73s.
> >
> > Keith
> > Zs6tw.
> >
> >
> >
> >
> >
> >
> > ------------------
> > Please let us know what you think of the changes made in r7597 to the
> > audio level meter. In particular, to the color(s) used for the
> > thermometer bar.
> >
> > For a trial period, we now have red indicating A/D saturation, green
> > "normal" levels, and yellow noise levels so low that quantization
> errors
> > are significant. One should "almost never" see the warning colors
> > unless something is significantly wrong, so my feeling is that the
> color
> > changes should not be distracting in normal operation.
> >
> > Should we stay with the three-color arrangement? If yes, could we
> > choose a better set of three colors?
> >
> > -- Joe, K1JT
> >
> >
> >
> > ------------------------------ ------------------------------
> ------------------
> > Announcing the Oxford Dictionaries API! The API offers world-renowned
> > dictionary content that is easy and intuitive to access. Sign up for
> an
> > account today to start using our lexical data to power your apps and
> > projects. Get started today and enter our developer competition.
> > http://sdm.link/oxford
> > ______________________________ _________________
> > wsjt-devel mailing list
> > wsjt-devel@lists.sourceforge. net <wsjt-devel@lists.sourceforge.net>
> > <mailto:wsjt-devel@lists. sourceforge.net
> <wsjt-devel@lists.sourceforge.net>>
> > https://lists.sourceforge.net/ lists/listinfo/wsjt-devel
> <https://lists.sourceforge.net/lists/listinfo/wsjt-devel>
> > <https://lists.sourceforge. net/lists/listinfo/wsjt-devel
> <https://lists.sourceforge.net/lists/listinfo/wsjt-devel>>
> >
> >
> >
> >
> > ------------------------------ ------------------------------
> ------------------
> > Announcing the Oxford Dictionaries API! The API offers world-renowned
> > dictionary content that is easy and intuitive to access. Sign up for an
> > account today to start using our lexical data to power your apps and
> > projects. Get started today and enter our developer competition.
> > http://sdm.link/oxford
> >
> >
> >
> > ______________________________ _________________
> > wsjt-devel mailing list
> > wsjt-devel@lists.sourceforge. net <wsjt-devel@lists.sourceforge.net>
> > https://lists.sourceforge.net/ lists/listinfo/wsjt-devel
> <https://lists.sourceforge.net/lists/listinfo/wsjt-devel>
>
> ------------------------------ ------------------------------
> ------------------
> Announcing the Oxford Dictionaries API! The API offers world-renowned
> dictionary content that is easy and intuitive to access. Sign up for an
> account today to start using our lexical data to power your apps and
> projects. Get started today and enter our developer competition.
> http://sdm.link/oxford
> ______________________________ _________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge. net <wsjt-devel@lists.sourceforge.net>
> https://lists.sourceforge.net/ lists/listinfo/wsjt-devel
> <https://lists.sourceforge.net/lists/listinfo/wsjt-devel>
>
>
>
> ------------------------------------------------------------
> ------------------
> Announcing the Oxford Dictionaries API! The API offers world-renowned
> dictionary content that is easy and intuitive to access. Sign up for an
> account today to start using our lexical data to power your apps and
> projects. Get started today and enter our developer competition.
> http://sdm.link/oxford
>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
>
> ------------------------------------------------------------
> ------------------
> Announcing the Oxford Dictionaries API! The API offers world-renowned
> dictionary content that is easy and intuitive to access. Sign up for an
> account today to start using our lexical data to power your apps and
> projects. Get started today and enter our developer competition.
> http://sdm.link/oxford
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
------------------------------------------------------------------------------
Announcing the Oxford Dictionaries API! The API offers world-renowned
dictionary content that is easy and intuitive to access. Sign up for an
account today to start using our lexical data to power your apps and
projects. Get started today and enter our developer competition.
http://sdm.link/oxford
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
