Hi all,
I'd like to contribute code but I'm up against a brick wall at the moment :(
I've loaded up configuration.ui in QTcreator and for the life of me I can't add
another section into the Audio Tab section because I can't get the vertical
spacer to go smaller and the main box to go bigger. I come from a MS Visual
Studio background so this is a steep learning curve.
The feature I'd like to see implemented is to keep the last widegraph settings
for the different JT modes so that when I change mode the settings are filled
in for me.
For example, the WSJT-X user guide suggests Bins/Pixel = 4 and Start = 200 for
JT9 and Bins/Pixel = 7, Start = 200 and the JT65/JT9 split at 2500 for JT65.
If I'm in JT9 and change to JT65 I need to change these settings, similarly
when I go back to JT9 from JT65.
My solution was going to be to add another tickbox in the "Audio" section of
configuration.ui labelled something like "Remember Wide Graph Settings", under
"Remember power settings by band" and then modify the code in widegraph.ui each
time the mode is changed to save the current settings and load the previous
settings for the new mode. The pseudo code works a treat!!!
Thanks to all for a wonderfull program, it's what got me back into amateur
radio.
Colin MM5AGM
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
