On 26/06/2017 18:36, Jim Brown wrote:
On Mon,6/26/2017 10:27 AM, Bill Somerville wrote:
To give an example of what we face, the current IARU region 1 band
plan requires all MGM activity to be between 50300 and 50400 so
expecting to run transatlantic QSOs on 6m JT9E/H on 50290 or indeed
JT65/JT9 on 50276 is going to cause the region 1 band police a problem.
Any bandplan that does not facilitate QSOs between regions is a
bandplan destined for failure. :)
73, Jim K9YC
Hi Jim,
I agree but the region band plan coordinators would reply that, at least
on 6m, there is no problem since the 50300 - 50400 section is available
everywhere for narrow band digital modes.
BTW the definition of narrow band digital modes is problematic as region
3 defines NB as not exceeding 2kHz bandwidth even though it shares
spectrum with SSB which is allowed up to 6kHz b/w. That means region 3
cannot use MSK144 (>2.4kHz b/w) in sections allocated to narrow band
digital (NB). Therefore in region 3 MSK144 on 6m would have to be above
50500 amongst the other wide band (WB) users like FM. As such a KL7 to
Asiatic Russia digital MS contact would have to be cross frequency!!
That seems rather unreasonable but that is where we currently are.
73
Bill
G4WJS.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
