Dear Steve,
I get no decodes with FT8 and r7775.
I tried to call CQ and I got an answer, but could not decode that either.
(The CQ was heard by multiple stations according to pskreporter.)
Five sample recordings are in a .zip under the following url:
https://www.dropbox.com/s/sgcfehcdwfrp7th/wsjtx-r7775-nodecode.zip?dl=1
Cheers,
Tamas HA5FTL
2017-07-02 13:58 GMT+02:00 Steven Franke <s.j.fra...@icloud.com>:
> For future reference, I’ve attached a plot summarizing the performance of
> the FT8 decoder in r7775. The 50% decoding threshold is at about -21 dB.
> These results pertain to an AWGN channel (no fading) and were obtained
> using .wav files generated by ft8sim. Each .wav file contains 25 signals. A
> total of 40 such files (1000 potential decodes) was analyzed at each SNR.
> The ft8sim DT parameter was set to 0.5s for this simulation.
>
> I should note that the idealized AWGN channel simulation used for this
> benchmark does not reflect the type of conditions that we typically see in
> real life on HF or 6m. This is mainly intended as a performance benchmark
> for development purposes - not an advertisement of actual performance in
> the real world!
>
> Steve k9an
>
>
>
>
> ------------------------------------------------------------
> ------------------
> Check out the vibrant tech community on one of the world's most
> engaging tech sites, Slashdot.org! http://sdm.link/slashdot
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
>
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
