Jim,
That box was not checked...r7838 appears to have fixed the problem.
Thanks for your suggestion. Ed, K0KC
[email protected]http://k0kc.us/
From: Jim Brown <[email protected]>
To: [email protected]
Sent: Monday, July 10, 2017 1:55 PM
Subject: Re: [wsjt-devel] r 7836 Issue
On 7/10/2017 10:14 AM, Ed Wilson via wsjt-devel wrote:
> I have been testing FT8 for the past week or so and today decided to
> try to make a JT65 contact on six meters. I am using r7836, which I
> built this morning. I made a contact with WB5TUF near Houston with -01
> at both ends and found an issue with his transmissions NOT showing in
> the Rx Frequency window unless I double-clicked his red background
> transmission to me in the Band Activity window. My cursor was aligned
> exactly with his signal.
>
> Again, this issue is with JT65, not FT8.
Look in settings to see if VHF/UHF features (or something like that) is
checked. That disables multiple decoding, causing what you're seeing.
73, Jim K9YC
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
