Rich,
I reported the same issue on July 9th here:
https://sourceforge.net/p/wsjt/mailman/message/35935125/
I followed up with more info a day later (since there was a flurry of other
bugs being reported): https://sourceforge.net/p/wsjt/mailman/message/35938038/
Between us there should be enough info to narrow the issue down.
________________________________
From: Rich - K1HTV <k1...@comcast.net>
Sent: Friday, August 11, 2017 11:13 AM
To: WSJT
Subject: [wsjt-devel] 15 vs 30 sec Fast Graph header
While running MSK144 with 15 second sequencing for Perseids meteor scatter
operation this morning, I noticed that instead of the Fast Graph header reading
0-15 it reads 0-30 seconds. Would it be possible for the time header to change
based on the length of the chosen 15 or 30 second sequence?
73,
Rich - K1HTV
PS - The Perseids meteors were flying this morning. Looks like a good shower
this year with the peak coming within the next 24 hours.
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
