"Yes, you can move the Tx frequency marker on the waterfall while
transmitting. If you stay within the same 500 Hz segment, the result
will be what you probably expected. Otherwise, probably not.
... the purpose of that checkbox is to enable (or not) sending new VFO
settings to your radio while it is transmitting. This is necessary for
EME Doppler tracking on microwave bands."
Joe,
I do not understand your reply. In 1.8.0-rc1, when "Allow frequency changes
while transmitting" is not checked, and when working rig split, it is not
possible to move the TX cursor on widegraph nor is it possible to scroll the TX
frequency on the main window. In short, neither the audio frequency nor the
Rig TX VFO frequency can be changed. That is the way I expected it to work.
Only if split is not enabled is it possible to change the TX audio frequency
while transmitting. That causes no problems because it is not possible to get
the audio frequency and TX VFO frequency out of "registration". 500 Hz
segments have no meaning if split is not enabled.
Has this behavior been changed in later code?
Thanks and 73,
Andy k3wyc
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
