Hi all,
If you are building WSJT-X from code in the development branch and
experimenting with it on the air, please pay attention to the commit
message for r8125 and report your findings here.
For full and open disclosure I'll copy the commit message here:
##########################################################################
Experimental new behavior for "Lock Tx=Rx" and for clicking on waterfall
and decoded text.
1. Checkbox "Lock Tx=Rx" is now labeled "Lock Tx Freq", and its meaning
is quite different. If checked, the audio Tx frequency cannot be
changed. It's like the "Lock" function on some transceivers.
2. Clicking on the Wide Graph waterfall and on lines of decoded text now
behave as follows:
Click on Action
---------------------------------------------------------------------
Waterfall: Click to set Rx frequency
Shift-click to set Tx frequency
Ctrl-click to set Rx and Tx frequencies
If Lock Tx Freq is checked, Tx freq does not move
Double-click to set Rx frequency and decode there
Decoded Text: Double-click to copy transmitting callsign to DX Call
and locator to DX Grid; change Rx frequency to decoded
signal's frequency; generate standard messages.
Tx frequency is not changed unless Ctrl is held down
and Lock Tx Freq not checked.
If this experimental behavior is adopted, some descriptions in the User
Guide and Special Mouse Commands will need to be updated.
3. Starting to implement a new function on the Tools menu, "Solve for
calibration parameters". This is not yet finished; DO NOT USE in its
present form.
##########################################################################
-- 73, Joe, K1JT
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
