What about allowing double-click to set both Tx/Rx on the wide graph?I don't
think that does anything now.
de Mike W9MDB
On Tuesday, October 17, 2017, 9:03:56 AM CDT, Dave Thorpe
<d...@webslave.co.uk> wrote:
Hi
Thank you the continuing development of WSJT-X and the new mode FT8. I am
really enjoying using both.
May I, however, raise a concern with RC3 which has changed the way the split
operation and selecting a frequency is achieved.
It is now required to use CTRL and a mouse click to set a frequency. This
requires 2 hands. Unfortunately there are many who are only able to use hand at
the same time due to disability. Stroke, loss of limb and in my case the need
to use a Monocular to see the screen. Therefore usability is greatly reduced in
this version in comparison to the previous version.
I would be most grateful if you could re-visit the change that has been
implemented in RC3 and consider the possibility to revert to the previous
method which worked perfectly well 😉
Regards
Dave Thorpe
M6RUG
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
