Hi,
I am using WSJT-X v1.8.0 r8193 together with my Yaesu FT-991 connected to my
PC via USB cable (CAT control via COM5, PTT via COM7). As my FT-991 seems to
need different audio power levels at different bands, I've checked the
"Transmit" checkbox for "Remember power settings by bands". Everything is
working well so far. Changed QRG is recognized correctly by WSJT-X or
FT-991, resp. either when changed at FT-991 or changed at WSJT-X.
However, I've observed the following behavior: Power settings by band are
ONLY correctly restored when the QRG is changed at WSJT-X. When I am
changing the QRG directly at my FT-991 (which I prefer) WSJT-X's power
settings ARE NOT CHANGED BY BAND. The behavior is reproducible.
Could this be a bug? Or am I doing something wrong?
73 de DG2YCB,
Uwe
____________________________________
German Amateur Radio Station DG2YCB
Dr. Uwe Risse
eMail: <mailto:[email protected]> [email protected]
Info: <http://www.qrz.com/db/DG2YCB> www.qrz.com/db/DG2YCB
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
