Cancel that message I don`t know how but the NA VHF CONTEST box got a check in
it??? this was triggering this response not the softwares fault a operator
error on me unselect this box all is well 73 de wa4mit
On Monday, December 4, 2017, 8:24:57 PM CST, David Tiller
<dtil...@captechconsulting.com> wrote:
Interesting. I just worked 4O4A on 80m FT8 and it proceeded perfectly. I'm
using 1.8 final.
--David TillerSr. Architect/Lead Consultant | CapTech(804) 304-0638 |
dtil...@captechconsulting.com
On Dec 4, 2017, at 9:04 PM, Morris Wideman via wsjt-devel
<wsjt-devel@lists.sourceforge.net> wrote:
Another call that really fouls up WSJT-X is 4O4A see attached picture of what
the TX boxes have in them. I turned off auto-seq typed in correct response to
send. Hopefully he copied but it took several re-sends 73 wa4mit Morris
On Monday, December 4, 2017, 5:36:00 PM CST, Libor Holous OK2ZO
<ok...@email.cz> wrote:
Dear Scott..
Look.. As I said, experienced smart operator will get the call correctly..The
others can repair it in their logs anytime later. It's not your problem. The
system is setup this way, so if you can't get standard call, you must use
compound and count with it.Lets see the example, not only for you or Gary...
On your side, I'd not use automatic reply 1st. Sit to some QRG, best lower one
300-500Hz, switch fixed QRG on.Tx6 CQ UP TI5/W7RITx5 DE TI7/W7RI EJ79 - to
include square for square hunters.Tx4 switch to RR73
In Settings - set Doubleclick enable TX.. Open logging dialog automaticaly.
And lets go for QSO as automat works..CQ UP...
Who replies with Tx1:TI7/W7RI OK2ZOOK2ZO W7RI -01W7RI OK2ZO R-02OK2ZO W7RI RR73
... opens logging dialog - logging QSOW7RI OK2ZO 73 ... during receiving this,
double clicking to another station of your choice, or you can let continue the
automat with DE TI5/W7RI EJ79
One minute or 1.5 minute on ideal state..
Who replies with Tx2:W7RI OK2ZO -10OK2ZO W7RI R-03W7RI OK2ZO RR73DE TI5/W7RI
EJ79 ... logging dialog, clicking save, quickly double clicking next in list or
wait until Tx5 is complete and waiting for new callers.
45s or 1.25 min for QSO.
You miss Grid here, but if it's not important for you? (BTW, you get it from
LotW when confirmed).If sb. calls you with Tx1 like:W7RI OK2ZO JN89you can bet,
he's got wrong call. Then you can click on Tx5 or Tx6 or just reply to another
caller and let Tx5 go during that period. If is not an idiot? - return to first
paragraph of this mail..
----------------------According my previous "question", my experience with lots
of stations from NA/SA is bad. They prefer US wide open window against Central
EU, especialy on upper bands. If they work EU, than here is band closed already
and they work West EU or BigGuns only. And it's not only on FT8 of course.. In
US? - EU is not interesting - rather ragchewing within US, right when opening
to us..Thats from my experience... I can't have some beams and towers in the
town. Vertical on the roof is a miracle for me and luxury, the others can't
have.
I'm not a big gun, but also with just a little bullet you can hit, if you know
howto...I thank so much to all authors of such wonderful mode, which helps me
aiming much better..
73s.
Libor
PS.. I do apologise for probable errors in my English..
Odesláno ze zařízení Samsung
-------- Původní zpráva --------
Od: Scott Bidstrup <sc...@bidstrup.com>
Datum: 04.12.17 21:52 (GMT+01:00)
Komu: wsjt-devel@lists.sourceforge.net
Předmět: Re: [wsjt-devel] Another Compound Callsign Problem
On 04/12/2017 12:57 p.m., Libor Holous OK2ZO wrote:
> Experienced users will quickly know, you are from Costa Rica.. Just send
> time to time CQ and standard 73 message with full call..
Libor, I understand what you are saying, but the reality is that a lot
of fellows in the States, when they sit down for a session, will simply
glance at the band activity window and not connect up my abbreviated
call and my full callsign, because it may not appear on their list of
decodes. If my full callsign, from a CQ or 73 message doesn't appear in
the band activity window, they will not appreciate that I am a DX station.
I do, in fact, call CQ frequently - mostly so my full callsign gets out
there, and also because it makes starting an autosequence more sure.
But when I'm working a pileup, as I am most of the time, I can go for
quite a few QSOs - ten or fifteen minutes - with the software never
sending a CQ, but simply replying to the first decode that pops up after
my last 73 message, and Call 1st then sends to the standard messages.
When that happens, I do not send a complete callsign at all until the
next 73 message, (and technically, that's not legal under the rules here
- we are supposed to transmit the full, unabbreviated call signs of ours
and the other station's call, during the first and last transmissions in
a QSO and "frequently" in between). And it also means my full callsign
is transmitted far less frequently, as it appears only in the 73
messages I send. If the other station who might be considering calling
me has a lot of band activity that is generating a ton of decodes, he
may not ever notice that my full call is a DX callsign. And very few,
if any, ever will ever figure it out from my grid square alone.
> Anybody will always put you to the cluster, so you won't have to be
> worry, you not have a pileup..
That is not always true when I am working a lot of Stateside stations,
many of which probably never realize, till my 73 message, that they've
even worked a DX station. Many, if not most stations in the States will
never spot me to the cluster (because, even though I'm DX, I'm in a
commonly worked country), and, because of my proximity to the States,
they represent the bulk of stations I work.
I can always tell when I've been spotted to the cluster because the
pileup instantly gets much bigger. And that happens only infrequently
when most of the stations I am working are Stateside. When I am working
a lot of Europeans, yes, at least a third of the stations I work there
will spot me. But that is a much less common practice in the States.
> Question is, if EU is more DX than US for you? For lot of stations from
> Caribean it's opposite..
For purposes of awards, they're all the same - anything outside of Costa
Rica is DX to me - including 200km up the road in Nicaragua or 150 km
down the road in Panamá. If your question is whether I am more desirous
of working E.U. than U.S., no, it doesn't matter to me as I'm not really
much of a DX chaser, unless it's a country I haven't worked, and then I
want it - no matter where it is. And in E.U. all I am lacking are
Andorra and Lichtenstein, but still lack several in Latin America,
mostly in the Caribbean.
73,
Scott Bidstrup
TI3/W7RI
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
<4o4a.gif>------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org!
http://sdm.link/slashdot_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
