Hi Ed, I have been using rev 1.8.0 on my MacBook Air (OS version 10.11.6) for 2 weeks with a Yaesu SCU17 interface. It works perfectly well with the audio card of the SCU17. I did not use the built in Mac audio interface with WSJT-X but I know it can decode because I managed to decode audio from my rig via the rig's loudspeaker and the Mac's microphone when the SCU17 audio car is not selected in WSJT-X prefs. Just now I tested the audio output on my Mac with signal sent by WSJT-X. It works.
73, Phil F5FDV Le 17 déc. 2017 à 09:02, Ed Stokes <[email protected]> a écrit : Is anyone successfully running 1.8.0 (final) on a Mac under OS X 10.11? On my Mac Mini .rc1 runs fine. in my experience, later revisions do not hear output from the Mac unless .rc1 is run first and final is run as a duplicate from the terminal. Can anyone verify that the final version actually works? 73, Ed W1KOK ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
