Hello,
first off, sorry if this subject has already been discussed and resolved
but could not see anything on my searches.
As the owner of an older Icom VHF SSB rig, I have a seemingly common
problem that my TX pass band is not flat, in fact using QRA64-D earlier
today with Rex, VK7MO revealed a significant ripple across the tones (about
3db) seen on the Bird output power meter.
As I am unsure how much control there is over the level of the tones
generated by WSJT-X but I wondered if there is a way to build in a simple
level control for TX tones across the passband?
In my head I had thought an adjuster for 500-750 750-1000 1000-1250 and so
on and be able to change the nominal value from 0db (flat) to be -1db or
+1db for each segment of the decided passband...
Maybe others have a better way of managing this that is not part of WSJTX?
Regards,
Peter, vk5pj
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
