Hello WSJT-User Group
I ask for help or tips.
WSJT-X does not react to PTT on new Yaesu-RIG!
I have problems with the PTT control of my Yaesu FT 891 when setting
up WSJT-x 1.8.0 or later. The program can not control the transmitter in
the TX-Mode. RX is ok.
I use 2 USB cables to the PC.
One of the RIG FT891 and one of the audio interface microham USB III.
Driver for Yaesu is the CP210x and at the interface the drivers from
Microham. Baud rate for CAT and Transfer 4800.
With another digital program MSHV 1.75 or 1.79 the PTT works
perfectly. But I want to work with WSJT-x 1.8.0 in FT8 Mode.
RIG: Yaesu FT-891, Microham USB Interface III and
Windows 10 Pro PX x64.
Pse Help
Anton
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
