Put WSJT-X slider at -12 and got no change moving between 17m and 20m. Rather than adjusting my PA settings, bumped output tx to ~100W by increasing my PowerSDR tx input gain - easier.
I have not seen any problems with VAC, but will try the VoiceBanana for comparison. Al Pawlowski, K6AVP Los Osos, CA USA > On Oct 3, 2018, at 18:46, wsjt-devel-requ...@lists.sourceforge.net wrote: > > Date: Wed, 3 Oct 2018 17:13:36 +0000 (UTC) > From: Black Michael <mdblac...@yahoo.com <mailto:mdblac...@yahoo.com>> > To: WSJT software development <wsjt-devel@lists.sourceforge.net > <mailto:wsjt-devel@lists.sourceforge.net>> > Subject: Re: [wsjt-devel] wsjt-devel Digest, Vol 56, Issue 12 > > You probably won't notice it at 1-3W.? I also have an ANAN 100 and use Voice > Banana as Muzychenko had too many dropouts. > > If you set WSJT-X at -12dB and adjust your PA settings to get something more > like 100W you should see the power gradually increase over a few seconds. > de Mike W9MDB
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
