Well, other than the 'fake it' frequency control options to keep the tx
audio in the middle of the passband...

On Mon, Oct 8, 2018, 11:09 PM Jim Shorney <jshor...@inebraska.com> wrote:

>
> It is a myth that you need CAT for digital modes. In fact you don't need
> it at
> all.
>
> 73
>
> -Jim
> NU0C
>
>
> On Tue, 9 Oct 2018 02:29:30 +0000, Shane Stroud wrote:
>
> >  CAT...  because that's kinda the point with most digital modes these
> days.  And it's an FT-847, not 840.
> >
> >________________________________
> >From: Alan VK2ZIW <bea...@unixservice.com.au>
> >Sent: Monday, October 8, 2018 6:41 PM
> >To: WSJT software development
> >Subject: Re: [wsjt-devel] Yaesu FT-847
> >
> >Hi all,
> >
> >Why do you need CAT control at all?
> >
> >What's really needed is a rig with Stability.
> >
> >Any rig with a digital VFO will do.
> >
> >My 2c.
> >
> >Yes, I have an FT-840 and it's OK.
> >
> >Alan VK2ZIW
> >
> >
> >On Mon, 8 Oct 2018 10:54:42 -0400, Karl Heinz Kremer wrote
> >> FT-840UNI would be OK. “Early” or “NoGet” would require the user to
> know more about what’s going on with these devices.
> >
> >>
> >>
> >Karl Heinz - K5KHK
> >>
> >
> >
> >>
> >
> >> On Oct 8, 2018, at 10:52 AM, Black Michael <mdblac...@yahoo.com<mailto:
> mdblac...@yahoo.com>> wrote:
> >
> >>
> >> What can we call these earlier rigs to make the apparent in the riglist?
> >>
> >
> >> FT-840EARLY  ???
> >> Or
> >> FT-840UNI (unidirectional)
> >> FT-840NOGET
> >
> >>
> >
> >> Or any better idea?
> >>
> >
> >> de Mike W9MDB
> >
> >>
> >
> >>
> >>
> >
> >>
> >
> >>
> >
> >>
> >> On Monday, October 8, 2018, 9:47:05 AM CDT, Karl Heinz Kremer <
> k...@khk.net<mailto:k...@khk.net>> wrote:
> >>
> >
> >>
> >
> >>
> >> This also seems to be the case with my early Yaesu FT-840 - it can
> receive CAT commands, but does not report anything back.
> >
> >>
> >>
> >
> >> Karl Heinz - K5KHK
> >>
> >
> >
> >
> >>
> >> On Mon, Oct 8, 2018 at 10:44 AM Black Michael via wsjt-devel <
> wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>>
> wrote:
> >
> >>
> >> What version of WSJT-X are you using right now?
> >>
> >
> >> Looks like we need a new rig entry for the earlier serial #'s and I can
> build you one for testing.
> >>
> >
> >> de Mike W9MDB
> >
> >>
> >
> >>
> >>
> >
> >>
> >
> >>
> >
> >>
> >> On Monday, October 8, 2018, 9:34:22 AM CDT, Shane Stroud <
> shanestroud1...@hotmail.com<mailto:shanestroud1...@hotmail.com>> wrote:
> >>
> >
> >>
> >
> >>
> >> I have discovered that the early serial numbered models of the Yaesu
> FT-847 had unidirectional CAT.  Basically, the software can send
> frequencies and modes to the rig, but the rig cannot respond.  This applies
> to serial numbers through about 8GXXXX. Mine is an 8EXXXX series.
> >>
> >
> >> In any version of WSJT, under any operating system, the rig will set
> frequency and mode, then error out because it cannot respond to polling.
> >>
> >
> >> I'm not sure if this needs fixed in WSJT or in hamlib, but other hamlib
> programs seem to work with the rig without issue.
> _______________________________________________
> >wsjt-devel mailing list
> >wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>
> >https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> >_______________________________________________
> >wsjt-devel mailing list
> >wsjt-devel@lists.sourceforge.net<mailto:wsjt-devel@lists.sourceforge.net>
> >https://lists.sourceforge.net/lists/listinfo/wsjt-devel
> >
> >
> >
> >
> >Alan
> >
> >Evil flourishes when good men do nothing.
> >Consider the Christmas child.
>
> >---------------------------------------------------------------------------
> >Alan Beard               Unix Support Technician from 1984 to today
> >70 Wedmore Rd.           Sun Solaris, AIX, HP/UX, Linux, SCO, MIPS
> >Emu Heights N.S.W. 2750  Routers, terminal servers, printers, terminals
> etc..
> >+61 2 47353013 (h)       Support Programming, shell scripting, "C",
> assembler
> >0414 353013 (mobile)     After uni, electronics tech
> >
>
>
> --
> Ham Radio NU0C
> Lincoln, Nebraska, U.S.S.A.
> TR7/RV7/R7A/L7, TR6/RV6, T4XC/R4C/L4B, NCL2000, SB104A, R390A,
> GT550A/RV550A, HyGain 3750, IBM PS/2 - all vintage, all the time!
>
> "Give a man a URL and he will learn for an hour. Teach him to Google and
> he will learn for a lifetime."
>
> HyGain 3750 User's Group - http://groups.yahoo.com/group/HyGain_3750/
> http://incolor.inetnebr.com/jshorney
> http://www.nebraskaghosts.org
>
>
>
>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to