Hi Folks. Looking at my e-mails from the group, you have a few issues ...
Anyway, I've not noticed anything that looks like my problem, being reported. Although, I have not read *ALL *the submissions. I'm using FT8 and the 2nd option for the generated messages. I have not tried any of the other modes with this rc version, yet. *No. 1.* ON RX, the software receives and decodes callsigns etc., OK. If I double click on a received call (*station calling CQ*), then it appears in the logging area, i.e. displays Call, Locator, AZ, and distance. BUT does not load anything into the generated messages box. This remains blank. However, when the software starts the TX sequence the software starts to send a "CQ" message on the frequency of the station I am trying to call. *No. 2.* If I decide to call CQ, this appears to function OK. However, when called, and having selected the station, (*either manually or via the 1st call option*) the software does not respond to being called, it just continues to send CQ, in the appropriate time slot. *My system.* Acer Aspire 3 - Latest updated Windows 10 Been working fine with previous 2.0.0 _ rc1 and rc2, and previous version of WSJTX Hope this is helpful. Best Regards Dave Boniface, M0HJS *Confidentiality & Security.* This entire communication including any attachments is a privileged and confidential communication transmission from the sender to the addressee/s and must not be disseminate distribute or copied by any means e.g. it may not be discussed with or passed onto or forwarded or re-transmitted either in "audio", "printed", "photographic", "electronic", "data", or in any other "format" or by any other "means" or "method", to any "third party" which may include but is not exclusively limited to "an individual", "newsgroup", "organisation", "group", "club", "society", "representative body", "bulletin board", "blog site", "web site", "publication" or "mailing list" without the express written prior consent of the sender. The Intellectual property of any of the contents of this communication including any attachments is fully acknowledged as and where applicable and otherwise is retained by the originator of the information / data in this communication. If you receive this communication by mistake and / or you are not an addressee all of the preceding stipulations shall apply to you as equally as if you were an addressee. Furthermore, you should immediately contact the sender to advise that you have received this communication and without delay totally destroy the received communication along with any copies that may have manually been made by yourself or automatically generated within your communication system. The computer system on which this communication was originated is monitored by appropriate security defence software. However, this is no guarantee that this message is totally free from unwanted infectious data. ALL users of the Internet and e-mail systems should ensure that they have their own up to date security measures in place. Your internet security is YOUR responsibility.
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
