TNX Bill I go to try this. I dont nead simultaneous running of the radios. Only one at every time. So I think two ICON:s and the first solution. I do like this whith my MixW two ICON:s and starting different configfiles, but running same soft. If I understand U correctly I now nead two installations off WSJT-X. In my earlier try. It always use same configfiles hi hi. But I try. I bee back with my experence later Bill. 73 have a nice evening. De SM4RGD Charlie
Den lör 24 nov. 2018 kl 14:25 skrev Bill Somerville <g4...@classdesign.com>: > On 24/11/2018 13:09, Charlie Carlsson wrote: > > Hello Bill TNX for ur reply. I use different logs and only one radio at > time. And my RigExpert TI-5 interface shift with relay to used radio. > I do this with my MixW software, and It work perfect. I use two different > config files for mix. One for WHF and one for SW and different logbooks > de SM4RGD > > Hi Charlie, > > as you have to share a rig interface you cannot run both simultaneously. > You have two options, firstly you can set up two icons for WSJT-X each > starting the application with a different '-r name' command line option > (one of them can have no '-r' option and that one will use your current > settings and log files directory). This meets your separate logbook > requirements as each instance of WSJT-X will have completely separate log > directories, so you will have two wsjtx_log.adi files for import into your > station logging applications. This setup is what you would use for > simultaneous running more than one rig but you can use with a shared > interface as well. The small con is that you must completely shut down > WSJT-X before switching the interface then starting the other instance, but > having two icons preset with the correct command line makes that very easy. > > The second option is to use two configurations within WSJT-X, this doesn't > meet the separate logbook requirement as they will share the same WSJT-X > log files directory so moving QSO details to your logging application is > more complex. To create a new configuration go to "Menu->Configurations". > When switching configurations you may be a transient rig control error, I > would recommend switching your interface first then any initial CAT setup > done by teh configuration switch over will be directed to the new rig. > > 73 > Bill > G4WJS. > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
