Problem is down this end of the world VK VU unless there are others using
it we can only get frustrated.
VK3VM fired up this morning and we did it, Also JA9PHV twenty minutes ago.

What i did was have pskreporter running on the internet, and I transmitted,
and looked for who received my FT8 signal.  It shows up with a time flag.
if you have reception indications then you are decoded by a RC4/5 station.
maybe unmanned but is auto reporting. (Settings>Reporting check enable PSK
Reporting.)
 what band is good for VU to VK3 or VK4.  Could  arrange to try a test
transmission.  Or get another ham you can communicate with to install RC5
as well.  until you get ONE QSO, you doubt yourself.. It's not you.

On Tue, 27 Nov 2018 at 14:32, Unni Tharakkal <unnitharak...@gmail.com>
wrote:

> Thank you Ken . Will try and see.
> 73s and regards
> Unni - VU2TE
>
> On Tue, Nov 27, 2018 at 9:54 AM Ken Myers <kenmyersglo...@gmail.com>
> wrote:
>
>> Hi Unni
>>
>> I had the same problem.  On HF many switched back to 1.9  to make qsos.
>> I installed RC4/5 in separate folder and can use either. (renamed the
>> shortcuts)
>>
>> I could see the waterfall but no decode. Transmissions must be from RC4/5
>> stations to decode. 77bit.
>>
>> I have made a few contacts on RC5 now.  Stick with it
>>
>> Build it and they will come!
>>
>> Ken
>>
>> On Tue, 27 Nov 2018 at 13:17, Unni Tharakkal <unnitharak...@gmail.com>
>> wrote:
>>
>>> Hai
>>>
>>> I tried the new RC.4 and. latest RC.5 upgrades. On both there is no RX
>>> decode how to solve it
>>>
>>> VU2TE
>>> Unni
>>> _______________________________________________
>>> wsjt-devel mailing list
>>> wsjt-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>>
>>
>>
>> --
>> Cheers
>>
>> Ken Myers
>>
>> Sunnybank Hills QLD AUS
>> M   +61 414 487 004
>>
>> _______________________________________________
>> wsjt-devel mailing list
>> wsjt-devel@lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>>
> _______________________________________________
> wsjt-devel mailing list
> wsjt-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
>


-- 
Cheers

Ken Myers

Sunnybank Hills QLD AUS
M   +61 414 487 004
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to