Dan, What freq are you using on 40. I always use 7075. My freq gets changed once in a while and I find I am not on the freq I think I am. hi.
I use PSK Reporter. Might give that a try and see if it shows anything different. When the rig is keyed does it show out put power. I had a problem a while back. The rig was keyed but no out put. One other thing you may want to check is your sound cards. I had a problem with erratic behavior and found for some unknown reason the cards were changing. I don't know if I ever figured out why but it's been working fine for some time now. When you call cq it may take a while. If you are only calling 3 or 4 times I think you're a bit optimistic. hi I look on the waterfall for what apears to be a clear spot and set my receive and xmit there. Hope that helps, John-NA6Y I am also running 2.0 On Tue, Dec 11, 2018 at 1:47 PM Dan Malcolm <[email protected]> wrote: > Yesterday I downloaded and installed v2.0. No issue installing, and made > a QSO on the first run. Made several other QSO’s during the day, and > thought all was well. This morning? Nada…..nothing….sort of. I am > getting a few decodes on 40 and 20 but it’s sparse. Enough to indicate > decoding is working. Then I tried calling CQ several time with no results > whatever. Even HamSpots says that I haven’t been heard in more than a day. > > > > So do I just be patient and wait for a bigger v2.0 population or do I have > a problem? I suspect I am just being impatient. > > > > __________ > > Dan – K4SHQ > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
