Hi Michael,
Also happened to me, but I noticed that the “Decode” was stuck on blue indicating that a decode never completed. Had to shut it down and restart to get it going again. Andrew VK3OE/VK3OER From: Black Michael via wsjt-devel [mailto:wsjt-devel@lists.sourceforge.net] Sent: Monday, 17 December 2018 15:38 To: WSJT software development <wsjt-devel@lists.sourceforge.net> Cc: Black Michael <mdblac...@yahoo.com> Subject: Re: [wsjt-devel] odd behavior I've had this happen in the middle of a QSO a few times now on V2. de Mike W9MDB On Sunday, December 16, 2018, 5:16:36 PM CST, Gary Rogers <cgaryrogers...@gmail.com <mailto:cgaryrogers...@gmail.com> > wrote: I’ve seen it in previous versions too…It happens when i hit the halt TX button shortly after the transmit cycle starts…Apparently the software thinks it should be receiving but the transmitter remains activated...Gary KO3F On Dec 16, 2018, at 3:50 PM, Black Michael via wsjt-devel <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > wrote: I'll add a a ditto to this too...seen this a couple of times now on 2.0.0 de Mike W9MDB On Sunday, December 16, 2018, 2:47:48 PM CST, Morris Wideman via wsjt-devel <wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> > wrote: Yes I have seen this. Software is in TX but radio is not so software decodes itself. Rear but happens. 73 wa4mit Morris On Sunday, December 16, 2018, 9:07:14 AM CST, L Barley <kd4fw.f...@gmail.com <mailto:kd4fw.f...@gmail.com> > wrote: <image.png> I'm not sure what to call this so I'll describe it. I'm on 30m just now and I got these vertical bars across the waterfall. The receive audio was normal during the cycle, but the decode was that I "received" my last outgoing transmission. The program stopped calling the station I was attempting to contact because KG7CW was calling him too, which is normal. I waited a couple cycles and went to another station to attempt a contact and got the same pattern. I sent the standard "TX 1", then got vertical bars on the waterfall in the next decode period, then "received" back my initial transmission. I restarted the program and it is working normally now. I'm using v2.0.0 on Windows 10.... Just wondering if anyone has seen this before... 73 Lance KD4FW _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel <image.png>_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel