Hi Al,

Thanks for advises.

Why u have a horizontal loop? From web photo, most is vertical (vertical as
the hollywood sign on hill)

Are these receive loop consists of 1 turn of coil and another outer
shielding tube, earthed to eliminate minor e field pickup. Outter shield
tube with a small gap, not a full ring as it short circuit the inner coil.

Is the coil as construction above, for use in MW AM radio factroy connect
to signal generator to create a standard h field to be picked up by ferrite
bar in mw am radio, since year 1950 style?

73 Simon

On Monday, December 31, 2018, Al Pawlowski <k6...@almont.com> wrote:

> The loop you reference is a broadband, amplified, rx only loop - not
> really a (small tuned) magnetic loop.
>
> I use an LZ1AQ setup with a horizontal loop, vertical loop and a vertical
> dipole - switchable via the LZ1AQ's onboard input relays.
>
> Both loops are significantly less “noisy" than the dipole and the vertical
> loop is usually quieter than the horizontal loop.
>
> I also have a rotatable, vertically mounted, small tuned loop (MFJ) which
> can, at times, beat the LZ1AQ loops on rx SNR because of the tuning - the
> tradeoff, of course, being bandwidth limits.
>
>
> Al Pawlowski, K6AVP
> Los Osos, CA USA
>
>
>
> On Dec 29, 2018, at 14:28, wsjt-devel-requ...@lists.sourceforge.net wrote:
>
> Date: Sun, 30 Dec 2018 05:36:06 +0800
> From: Simon <simon...@gmail.com>
> To: "k...@arrl.net" <k...@arrl.net>
> Cc: WSJT software development <wsjt-devel@lists.sourceforge.net>
> Subject: Re: [wsjt-devel] SOTA test at 'low radio noise' area to
> evaluate 'slow mode' perfromance
>
> How good is magnetic loop antenna, may be with amplifier for receive
> only, in REJECTING man made noise, especially at or near city area,
> with huge number of SMPS, florescent lamp etc. at people's home?
>
> This websdr use loop and received around 90 to 100 countries per week
> on pskreporter.info statistics. (loop currently down)………..
>
>
>
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel

Reply via email to