Yes, we have noticed this routinely with compound callsigns. It likely
is related to the complexity of compound callsigns and lack of number of
bits to send all information. I noticed if you hover your mouse over the
*Settings > General* tab on top of the *Station Details* "Message
generation for type 2 compound callsign holders:" there is some
information that might be helpful. Hopefully others will provide more
details.
73
On 1/31/2019 5:44 AM, Martin Davies G0HDB wrote:
Hello all, I'm running WSJT-X v2.0.0 r784f75 on a PC with 32-bit Win 7 Pro.
I've discovered that for a few of my recent QSOs the received-report field
didn't get populated
when the QSO was logged. I first spotted this when I looked at my QSOs as
picked up via
UDP by the Logger32 app, and then when I checked the corresponding entries in
the
wsjtx_log.adi file I found that the <rst_rcvd:x> ADIF field was also empty, ie.
the field
appeared as <rst_rcvd:0> and didn't have the expected 3-digit report eg. -10,
that I'd received
during the QSO.
From what I've observed over the last week or two this only seems to occur
when the station
I've worked has a 'compound' callsign such as VE2/UT3UA, SV1AQY/1, PJ7/IZ5KID or
FG/F6ITD - as far as I've been able to tell, without doing any exhaustive
observations, the
received-report field always gets populated and logged correctly when the QSO
is with a
station with a standard callsign.
On the occasions I've spotted the absence of a received-report figure in the
'Rpt Rcvd' field
shown in the 'Log QSO' dialogue box before the QSO is actually logged, in the
Logger32 log,
or in the wsjtx_log.adi file, I've manually entered the report into the log and
amended the
<rst_rcvd:0> field in the ADIF file to show the report received, but I've found
quite a few
entries in my overall wsjtx_log.adi file that don't show a received-report
figure. Some of
these pre-date the release of v2.0.0 so I don't know what caused them - I
suspect there could
be many possible causes including operator finger trouble...!
I'll continue to observe what happens when I do work stations with compound
callsigns -
there's only a few of them around - and will try to get a more accurate view on
whether or not
the received-report field gets populated correctly when I log such QSOs, but in
the meantime
I'll be interested to know if anyone else has observed this effect. I haven't
found any
reference to it in either this email reflector or the Yahoo! group.
--
73, Martin G0HDB
---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
--
Gene Hinkle
2026 Spyglass Hill, Leander, TX 78641
e-mail to Gene: ghin...@gmail.com
cell phone or text messaging: (512) 413-9251
--
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
