What rig driver are you using in WSJT-X?
Mike
On Thursday, January 31, 2019, 2:04:49 PM CST, [email protected]
<[email protected]> wrote:
FLEX 6700 using DAX audio, WIN 10 ver 1803 OS build 17134.523 HP I7 computer,
SSDR 2.4.9 and WSJT-x V2.0.0
In a message dated 1/31/2019 13:55:26 Eastern Standard Time,
[email protected] writes:
What is your rig and audio setup?
de Mike W9MDB
On Thursday, January 31, 2019, 12:51:07 PM CST, bergeracb--- via wsjt-devel
<[email protected]> wrote:
I have been fighting this problem for months so I don't know if it is a
Microsoft update or not.When it strikes me nothing I do to either SSDR or
WSJT-X makes any difference in allowing wsjt-x to transmit. Closing WSJT-X with
the red X at this stage only moves WSJT-X to the background tasks section of
the TASK Manager Window, and you can not restart WSJT-X(because it is still
running) until you shut down WSJT-X using the End Task command in Task
Manager.When the problem shows up Open the Task Manager Window and look at the
CPU usage column (in the Apps section next to WSJT-X). Mine is indicating
between 15 to 30 percent usage. (under normal operations it is usually about 1
to 5 percent). Click on the WSJT-X
Red X to close the program and the WSJT-X program will move from the Task
Manager Apps section to the Background Tasks section and continue to run tat he
high CPU usage percentage. At this point you can only shut it down with the END
TASK command (right click on the wsjt-x program on the Task Manager window).
WSJT-X closes then you can restart the program normally. It will also work if
you restart the computer, but that is a PIA.Hope someone can figure it out
because it hits me 2 to 3 times a day.Al, N4ABThis response is a lot longer
than I meant it to be.
In a message dated 1/31/2019 12:36:06 Eastern Standard Time, [email protected]
writes:
Hello Dick-This may or may not help your issue;
There is a problem in V2.4.9 that causes the Tune button not to work.I have
found the problem when operating multiple panadapters that are on different
modes.IE Working CW on a panadapter and then clicking TX on WSJT that's on a
different panadapter.The fix is to change the mode on the FT8 slice to a
different mode and then back to DIGU.
So when you notice the problem on FT8, change the mode from DIGU to DIGL and
then back to DIGU.Hope this helps.
Bill W2PKY
On Thu, Jan 31, 2019 at 11:43 AM Richard Solomon <[email protected]> wrote:
I recently had an update installed by Microsoft.I now find that if I leave FT8
running for a time, I can no longer Transmit (Tune buttondoes not work).If I am
active on FT8 all is well, so I can only surmise Microsoft has re-arranged
myComputer.
Any ideas what I should look for ?
Tnx, Dick, W1KSZ
Sent from Outlook_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
