On 1/20/19 4:50 AM, Frank Kirschner wrote:
Hi Frank & all,
First thing I noticed was that when I double-clicked on his call in the
Band Activity window, it wasn't made the active call. The last call I
worked stayed in the transmit messages list. So I manually entered his
call. It seemed to transmit the first message OK. However, every few
minutes, either the active call in the transmit messages window would
switch back to the previous call, or the QRG would jump to 3.573 MHz. I
switched back and transmitted some more, but this kept happening.
I'm not sure if this is the subject pointed on previously.
Please allow me to explain my observation, in order to verify.
I'm on FT8 mode. A have performed and terminated a QSO with a first
station. Now, a second station is calling me on another frequency. The
entry appears with a red background colour. I double click on this entry
in order to respond to this second calling station. The green RX marker
jumps to the frequency of the calling station, but the red TX marker
remains in place although "Hold TX Freq" is OFF. Therefore I'm now
transmitting on the previous frequency where my first partner station is
still working.
Bug or feature ? This behaviour was present in 2.0.0 and is still
present in 2.0.1. If I remember well, this behaviour has the reported
previously here.
Best wishes,
Claude (DJ0OT)
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
