Can you run rigctld with WSJT-X using "Hamlib NET rigctl" and send the output?
>From a cmd prompt...you may get a firewall warning you need to
>acceptrigctld-wsjtx -m 122 -r COM1 -s 9600 -vvvvv >log.txt 2>&1
WSJT-X should be able to hook up to it...duplicate your problem...then send
log.txt to me and we should be able to figure out what's going on.
de Mike W9MDB
On Wednesday, April 3, 2019, 2:46:19 PM CDT, Alessandro Gorobey via
wsjt-devel <[email protected]> wrote:
Hi All,
I try to debug a strange program operation on first start up after OS boot.
windows 10 ver 1809
hamlib as git clone git://git.code.sf.net/u/bsomervi/hamlib
u-bsomervi-hamlib (integration branch)
Radio is FT857 via hamlib
wsjt-x 2.0.1
The question is why the radio go to 7075 Khz, not the frequency on the
radio.
The 7075 is not in any listed frequency and the "Monitor return to last
used frequency" is not selected.
For example:
- turn on radio (is on 3573 for yesterday)
- Boot computer, login and run WSJTX fron icon on desktop
- Radio switch to 7075
Obviously this doesn't happen every night when I get home
CAT is fully working and there is no RF returns as on turn on there is
only reception.
Happens to someone else ???
Thanks
--
73
Sandro
IW3RAB
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
