Re: James Shaver 2019-04-29 <c643e024-9f21-4bed-b08c-9b8c9a4cb...@gmail.com> > I’m on 20 meters - After about 2-3 minutes of operating, I’m seeing the mode > getting changed back to FT8 and my frequency is jumping to 14.074. This > appears to be random (though it still shows the “FT4” configuration as being > selected). Selecting FT4 as the mode does not put me back to 14.080 but > closing the program and reopening brings me back to where I need to be. ****A > reboot appears to have cured this**** but FYI in case anyone else is > experiencing a similar issue.
I have a similar problem. I was manually tuning to 7,047 and everything seemed normal (apart from the occasional "Rig control error" popups that I had always popping up every 10 minutes or so). But when I added the FT4 freqs to the configuration, the program started randomly changing bands, mostly after the end of the TX cycle. I could complete a few QSOs on 30m and 20m, but after every second TX cycle or so, it would jump to the 80m or 40m FT4 freqs. Maybe my rig control is much more instable than the occasional "Rig control error" popups suggest, but wsjtx 2.0.x was able to ignore most of them. Now it seems that it jumps bands on each of them. I have true rig split mode active, which worked fine in 2.0.x. Christoph _______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
