On 30/04/2019 16:01, Wolfgang wrote:
I am using a batch file to set filters and other parameters for the TS-990
and starting WSJT-X in sequence. The TS-990 is set in the batch file to go
into mode 'USB-D3' (one of the 3 different data mode settings).
WSJT-X 2.1.0-rc5 resets the TS-990 back into 'USB' (no data), so I have to
press the 'Data' button 3 times on the front panel. (Hamlib ?)
WSJT-X 2.0.1 accepts those settings, does not change anything, and the
TS-990 stays in the previous set USB-D3.
My settings:
COM 4 / 19200 / Poll Interval 1 sec
8bit / one stop bit / Hardware handshake
PTT CAT / Rear-Data / Mode None*
Split Fake it
* no difference if I set 'Mode None', 'Mode USB' or 'Mode Data/Pkt'
Hi Wolfgang,
how are you sending commands to your rig in your batch file? Are you
using the Hamlib rigctl tool?
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
