Looking at this ("Microphone Properties" for the USB Audio Codec that the
IC-7300 provides and that WSJT-X uses as input):[image: miclevel.png] It gets set to 100% whenever WSJT-X 2.1.0-rc5 starts, and I have to set it to 40% "by hand". WSJT-X 2.0.1 did not have this issue. Windows 10 Pro x64 here. 73, Paul K6PO On Tue, Apr 30, 2019 at 5:48 AM Black Michael via wsjt-devel < [email protected]> wrote: > Are you guys looking at the dB level in the audio management panel? Or > the % level? > WSJT-X does not touch the audio so it has to be Windows doing it. > > Recording audio should be at 0dB. > > de Mike W9MDB > > > > > On Tuesday, April 30, 2019, 6:55:30 AM CDT, kf8my--- via wsjt-devel < > [email protected]> wrote: > > > It also does it in Win7, audio sound recording to max on restart. > Mike/kf8my > > > > -----Original Message----- > From: Joe, LB1HI <[email protected]> > To: wsjt-devel <[email protected]> > Sent: Tue, Apr 30, 2019 6:46 am > Subject: [wsjt-devel] Another observed drawback - audio input level > > Hi, > Another observed drawback is that after each WSJT-X restart, previously > pre-set audio (Win 10 64 bit) signal input level of the sound card > changes. It changes spontaneously. It changes to a maximum - 100% of > the level setting range. > > 73`s Joe > > > > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > _______________________________________________ > wsjt-devel mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/wsjt-devel
