Why would you want to TX on his frequency ? On Thu, 2 May 2019 at 15:30, Morris Wideman via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote:
> Many thanks to the development team for sharing FT4 with us all. This > faster FT should really help the DXpeditions and Contesters I think it > works great. Thank you all very much. > I do not believe this bug has been previously reported. When you have > answered a CQ (station 1) but get no response then proceed to call a new > station (2) and now station 1 answers you. When you double click on his > call to change to station 1 frequency the receive channel changes to his > freq but the TX does not it will remain on present freq. Holding down the > Ctrl key while double clicking on station 1 will move both TX & RX and no I > did not have the Hold TX Freq selected it is doing this when it should be > locked together. Included 2 screen shots of this happening. Second is a > late return call from an EK station I have circled my return to him at this > time I was calling the TA station on another freq as you see my return was > on the TA freq not where the EK called me. > Otherwise I have managed to use FT4 RC5 with much success even it seems to > the contrary of the less sensitivity I seem to be reaching EU > with better results using less power?. > My Best 73 Morris WA4MIT > _______________________________________________ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel >
_______________________________________________ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
