Thanks Al, that is helpful.
73
Bill
G4WJS.
On 09/05/2019 18:28, Al Pawlowski wrote:
No. Since installing rc5, I have not launched 2.0.1. Forgot to
mention, I am running the 64bit rc5 and it mostly happens after I
close the rc5 settings window after some kind of change. I think I
have also seen it on a configuration switch.
Al Pawlowski, K6AVP
Los Osos, CA USA
On May 9, 2019, at 07:59, wsjt-devel-requ...@lists.sourceforge.net
<mailto:wsjt-devel-requ...@lists.sourceforge.net> wrote:
Date: Thu, 9 May 2019 15:42:19 +0100
From: Bill Somerville <g4...@classdesign.com
<mailto:g4...@classdesign.com>>
To:wsjt-devel@lists.sourceforge.net
<mailto:wsjt-devel@lists.sourceforge.net>
Subject: Re: [wsjt-devel] wsjt-devel Digest, Vol 63, Issue 64
On 09/05/2019 15:38, Al Pawlowski wrote:
I have not had any crashes, but have had regular instances of the
WSJT-X main window moving from its previous position and/or increasing
in height on startup, mostly after a preference/settings change.
Usually, the window grows vertically a few rows, pushing JTAlert
partially off screen. Then, if I pull it down before resizing,
resizing is no longer possible as the lower edges are off-screen. I
run WSJT-X on a large second monitor. I have to move the WSJT-X window
to the smaller primary screen and then back to make the resize capable
edges accessible. It?s annoying and does not happen with v2.0.1.
Running 64bit rc5 on Win10, build 17763
Hi Al,
are you switching between v2.1.0 RC5 and v2.0.1 when this happens?
73
Bill
G4WJS.
_______________________________________________
wsjt-devel mailing list
wsjt-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/wsjt-devel
